What to do when installing piping and piping connections
Calibration of the tube before welding
Observe the heating time of the pipe and the connection according to the time stated in the table from the moment of insertion of the pipe and the connection on the welding mold
Make sure that the pressure of the hand is adjusted so that the pipe or connection fits into the welding machine according to the above times.
Avoid cleaning teflon-shaped teflon shapes with sharp objects and winning objects, and to clean the welds, use a piece of cloth or a piece of wood that is free from any sharpening.
Avoid wringing the tube and connecting after welding.
Teflon calibers are free from any lines and ensure complete certainty for Teflon's health. At the end of each working day, adjust the welding molds (at 280 ° C) to cotton fabric.
Note: Only the temperature required for welding must be 280 ° C under any circumstances, it is obvious that lower or higher temperatures do not involve the standard welding.